RE: [Ethereal-users] Can not see vlan tag information with Ethereal

["Peter Wong" <pewong@xxxxxxxxxx>]

Sake,

I rolled back the ethereal release from 0.10.14 to 0.10.13 and it works without any setting. So I believe the vlan tagging information display/capture is broken in release 0.10.14

Thanks,
Peter

-----Original Message-----
From: ethereal-users-bounces@xxxxxxxxxxxx
[mailto:ethereal-users-bounces@xxxxxxxxxxxx]On Behalf Of Sake Blok
Sent: Tuesday, February 28, 2006 5:33 PM
To: Ethereal user support
Subject: Re: [Ethereal-users] Can not see vlan tag information with
Ethereal


On Tue, Feb 28, 2006 at 02:15:34PM -0500, Peter Wong wrote:
> 
> I had gone through the pages that you mentioned and did not find much information. Do you still have any lead to trouble shoot the problem?

You mentioned that you used a filter, was that a capture filter? If
you don't use a filter, does that make the 802.1Q tags visible?

If so, please use the capture filter "vlan and host x.x.x.x".

If not, you will still have to find a way to get the 3com driver
to pass the tags to the upper protocols. I'm not sure whether
the 3com 3c905b is capable of doing so and if there are windows
drivers for it to make that possible. I could not quickly find
an answer to that question with google. Does anyone know if the
cards (and windows drivers) support 802.1Q?


Cheers,  Sake
_______________________________________________
Ethereal-users mailing list
Ethereal-users@xxxxxxxxxxxx
http://www.ethereal.com/mailman/listinfo/ethereal-users