Hi,
That information was very useful.
I have enabled Loopback Adapter on my machine. I started Ethereal and
selected the Loopback adapter and started the capture without setting
any filters. I performed a ping on my own machine but noticed that
nothing was being captured. Am I missing something?
Guy Harris wrote:
Leo Jose
wrote:
I set the capture string to *host ip1, *where
ip1 is my ip address. Then I run a Server->Client application on a
single machine itself, but Ethereal fails to capture anything.I even
tried *host ip1 and host ip1 *but even that didn't work
If I run the server or client on different machines, then changing the
capture string to *host ip1 and host ip2 *will work without any
problems.
http://wiki.ethereal.com/CaptureSetup/Loopback
_______________________________________________
Ethereal-users mailing list
Ethereal-users@xxxxxxxxxxxx
http://www.ethereal.com/mailman/listinfo/ethereal-users
Disclaimer: This e-mail and any attachment is for authorized use by the
intended recipients only. It may contain proprietary material,
confidential information and/or be subject to legal privilege of
eInfochips Ltd. If you have received this message in error, please
notify the originator immediately. If you are not the intended
recipient, you are notified that you are strictly Prohibited from
retaining, using, copying, altering or disclosing the contents of this
message.
--
Leo Jose
|
