Re: [Ethereal-users] Newbie: Capture WAN Interface

[Guy Harris <gharris@xxxxxxxxx>]

Eric Paulsen wrote:
> Is it possible to setup ethereal to capture all traffic on the the WAN 
> of our SonicWall XPRS2 firewall?

According to the SonicWall XPRS2 data sheet, the WAN interface on the 
XPRS2 is a 10/100 Ethernet port, i.e. it doesn't directly connect to a 
WAN using, say, a PPP serial (async or sync) line, it connects in 
between some WAN connection box and a LAN.

As such, to capture on the WAN, you'd have to do something such as 
plugging the XPRS2's WAN port, the WAN connection box's Ethernet port, 
and the Ethernet port of the machine running Ethereal into a hub (not a 
"switching hub", but a real no-switch hub; if it's a 10/100 hub, all 
three of those ports will have to run at the same speed.  If those ports 
are running in full-duplex mode, that might not be possible.  You might 
also be able to do it with a network tap; see the "Capture using a 
network tap" section of

	http://wiki.ethereal.com/CaptureSetup_2fEthernet