Yep, it's rediculous (sic). Unfortunately Ethereal can't quite do this either. So, please write the code to do this!(it has been noted more than once on the development list that this feature is needed.) In the mean time in Ethereal you can use a byte-wise display filter on the IP packet (only works nicely if the mask is 8, 16 or 24 bits. "ip[12-14]== 0a:01:02" will match source IP addresses 10.1.2.x (It is an exercise for the reader to figure out destination address lookups and other masks) Martin Martin Visser Network Consultant - Compaq Global Services Compaq Computer Australia 410 Concord Road Rhodes, Sydney NSW 2138 Australia Phone: +61-2-9022-5630 Mobile: +61-411-254-513 Fax:+61-2-9022-7001 Email:martin.visser@xxxxxxxxxx -----Original Message----- From: Frank Kim [mailto:frank@xxxxxxxxxxxxx] Sent: Saturday, 1 September 2001 6:03 PM To: ethereal-users@xxxxxxxxxxxx Subject: [Ethereal-users] Sniffer Pro vs Ethereal Hi all, Can I get some input on the above subject as far as 'quality' and ease of usage. Also, I have the below question if anyone could help. I know it's not Ethereal related, but I'm desperate. ######################################################################### Can you filter a subnet on a sniffer pro? I'm using sniffer pro 3.0 on NT platform. I am able to filter a single host or any host. But I cannot filter a subnet, for example, 10.10.10.0/24. I have tried entering in all sort of combination such as: 10.10.10.* 10.10.10.*.* 10.10.10.0/24 10.10.10.0 /24 10.10.10.0/255.255.255.0 10.10.10.0 /255.255.255.0 10.10.10.0 255.255.255.0 10.10.10.any 10.10.10. 10.10.10.0 What am I missing? Or maybe this sniffer software doesn't support a subnet filtering? If that's the case, then it's rediculous. Because it does support 'any' which is everything. Thanks for any input. ######################################################################## -Frank _______________________________________________ Ethereal-users mailing list Ethereal-users@xxxxxxxxxxxx http://www.ethereal.com/mailman/listinfo/ethereal-users
Powered by MHonArc 2.6.10